P/2 DA2xi, P/2 DA2xi MT |
|
Video |
Gain |
|
P/2 DA2xi |
Output: 0 dB or 0.4 dB, selectable
Local monitor output: unity |
P/2 DA2xi MT |
Output: 0 dB or 0.6 dB, selectable
Local monitor output: unity |
Peaking |
|
P/2 DA2xi |
Output: selectable, 0.7 dB or 1.4 dB at 100 MHz
Local monitor output: fixed |
P/2 DA2xi MT |
Output: selectable, 0 dB or 0.6 dB at 100 MHz
Local monitor output: fixed |
Bandwidth |
350 MHz (-3 dB) |
|
Video input |
Number/signal type |
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video |
Connectors |
1 female 15-pin HD |
Pin connections |
ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through).
Pin 9 is floating. |
Nominal level |
1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
Minimum/maximum levels |
Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain |
Impedance |
75 ohms |
Horizontal frequency |
15 kHz to 135 kHz |
Vertical frequency |
30 Hz to 170 Hz |
Return loss |
<-38 dB @ 5 MHz |
DC offset (max. allowable) |
1.0 V |
Input coupling |
DC |
|
Video output |
Number/signal type |
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video (follows input type)
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through (ID bits are passed through.) |
Connectors |
2 female 15-pin HD |
Nominal level |
1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video at unity gain |
Minimum/maximum levels |
Analog, 0.3 V to 1.5 Vp-p (follows input) |
Impedance |
75 ohms |
Return loss |
<-40 dB @ 5 MHz |
DC offset |
±5 mV with input at 0 offset |
|
Sync |
Input type |
RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
Output type |
RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
Output type |
RGBHV, RGBS, RGsB, RsGsBs |
Input level |
1.5 V to 5.0 Vp-p |
Output level |
TTL, 5 Vp-p, unterminated |
Input impedance |
|
P/2 DA2xi |
<1k ohm (default) or 10k ohms, selectable |
P/2 DA2xi MT |
510 ohms (fixed) |
Output impedance |
75 ohms (default) or 50 ohms, selectable |
Max. propagation delay |
60 ns |
Max. rise/fall time |
4 ns |
Polarity |
Positive or negative (follows input) |
|
Audio — P/2 DA2xi MT only |
Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response |
20 Hz to 20 kHz, +0.05 dB, -0.1 dB |
THD + Noise |
0.03% @ 1 kHz at nominal level |
S/N |
>90 dB (balanced) at maximum output |
Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
Stereo channel separation |
>80 dB @ 1 kHz, >60 dB @ 20 kHz |
CMRR |
>67 dB @ 20 Hz to 20 kHz |
|
Audio input — P/2 DA2xi MT only |
Number/signal type |
1 stereo, unbalanced |
Connector |
(1) 3.5 mm stereo jack, female; tip (L), ring (R), sleeve (GND) |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Gain error |
±0.1 dB channel to channel |
Nominal level |
-2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output |
Maximum level |
>+10 dBV (3.16 V) (unbalanced) at 1%THD+N |
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output — P/2 DA2xi MT only |
Number/signal type |
1 stereo, balanced/unbalanced |
Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Gain error |
±0.1 dB channel to channel |
Nominal level |
-2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output |
Maximum level (Hi-Z) |
>+15 dBu (4.36 V), balanced at 1% THD+N, with external power supply |
Maximum level (600 ohm) |
>+9 dBm (2.18 V), balanced at 1% THD+N, with external power supply |
|
General |
External power supply |
100 VAC to 240 VAC, 50-60 Hz, 4.5 watts, external; to 12 VDC, 1 A, regulated |
Power input requirements |
12 VDC, 0.2 A |
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling |
Convection, no vents |
Mounting |
|
Rack mount |
Yes, with optional 1U rack shelf |
Furniture mount |
|
P/2 DA2xi |
Yes, with optional under-desk mounting kit |
P/2 DA2xi MT |
Yes, with included under-desk mount kit or optional through-desk mount kit |
Pole mount |
Yes, with optional pole mount kit |
Enclosure type |
Metal |
Enclosure dimensions |
1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.) |
Product weight |
0.5 lbs (0.3 kg) |
Shipping weight |
3 lbs (2 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
Warranty |
3 years parts and labor |