TP Series Transmitters |
|
Video — video models |
Number/signal type |
1, 2, or 4 sets of proprietary analog signals |
Connectors |
1, 2, or 4 shielded RJ-45 female |
TP T 15HD 45 |
(1) 8-pin spring force captive wire connector |
All other models |
1, 2, or 4 shielded RJ-45 female |
|
Video input — video models |
Number/signal type |
|
TP T 15HD A, TP T 15HD 45 |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source |
TP T 15HD AV |
1 analog RGBHV, RGBS, RGsB component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source and
1 NTSC/PAL/SECAM composite video |
TP T BNC DA4 |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source |
NOTE |
These products accept component video with bi-level sync only. |
|
Connectors |
|
TP T 15HD A, TP T 15HD 45 |
(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.) |
TP T 15HD AV |
(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.)
1 RCA female |
TP T BNC DA4 |
5 BNC female |
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
Minimum/maximum levels |
0.3 V to 1.45 Vp-p with no offset at unity gain |
Impedance |
75 ohms |
Horizontal frequency |
15 kHz to 130 kHz |
Vertical frequency |
30 Hz to 150 Hz |
Return loss |
<-30 dB @ 5 MHz |
DC offset (max. allowable) |
100 mV |
|
Video output — refer to the TP Receivers Family User's Manual, part #68-547-02. |
|
Audio — audio models |
Number/signal type |
1 or 2 sets of analog proprietary signals |
Connectors |
|
TP T A 45 |
(1) 2-pin direct insertion captive screw connector |
All other models |
1 or 2 female RJ-45 |
Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
S/N |
>63 dB at maximum output (unweighted) |
Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
Stereo channel separation |
>66.6 dB @ 1 kHz |
CMRR |
>33 dB @ 20 Hz to 20 kHz |
|
Audio input — audio models |
Number/signal type |
|
TP T 15HD A, TP T A 45 |
1 stereo, unbalanced |
TP T 15HD AV |
2 stereo, unbalanced |
Connectors |
|
TP T 15HD A, TP T A 45 |
(1) 3.5 mm mini jack |
TP T 15HD AV |
(1) 3.5 mm mini jack, 2 female RCA |
Impedance |
5k ohms, unbalanced, DC coupled |
Nominal level |
-10 dBV (316 mV) |
Maximum level |
+5.5 dBu, (unbalanced) at 1%THD+N |
CMRR |
>75 dB @ 20 Hz to 20 kHz |
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output — refer to the TP Receivers Family User's Manual, part #68-547-02. |
|
General |
Recommended cable type |
Enhanced Skew-Free™ AV UTP Cable or CAT 5/5e/6 (shielded or unshielded) |
Power supply |
|
TP T 15HD A, TP T 15HD AV |
External
Output: 15 VDC, 0.8 A
Or provided by the TP R receiver for up to 300' (91.4 m) |
TP T BNC DA4 |
External
Output: 15 VDC, 0.8 A |
TP T 15HD 45 |
External
Output: 12 VDC, 1.0 A |
TP T A 45 |
Shared with the TP T 15HD 45 transmitter |
NOTE |
The TP R 15HD A receiver does not provide power to any twisted pair transmitter. |
|
Temperature/humidity |
Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling |
Convection, no vents |
Mounting |
Rack mount |
TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4 |
Yes, with the optional TP rack shelf mounting kit and an optional standard rack shelf kit |
Furniture mount |
|
TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4 |
Yes, with an optional under-desk or through-desk mounting kit |
TP T 15HD 45, TP T A 45 |
No, but mountable in a 45 mm x 45 mm opening in common European wall boxes, floor boxes, or cable channel systems |
Enclosure type |
Metal |
Enclosure dimensions |
|
TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4 |
1.3" H x 6.8" W x 4.5" D (<1U high, <half rack width)
(3.3 cm H x 17.3 cm W x 11.4 cm D)
(Depth excludes connectors.) |
TP T 15HD 45, TP T A 45 |
Plate |
1.8" H x 1.8" W x 0.8" D
(4.5 cm H x 4.5 cm W x 2.0 cm D) |
Device |
1.1" H x 1.6" W x 1.2" D
(2.9 cm H x 4.1 cm W x 3.0 cm D)
(Depth excludes front and rear panel connectors and controls.) |
Product weight |
|
TP T 15HD A, TP T 15HD AV |
0.8 lbs (0.4 kg) |
TP T BNC DA4 |
0.9 lbs (0.4 kg) |
TP T 15HD 45, TP T A 45 |
0.3 lbs (0.1 kg) |
Shipping weight |
3 lbs (2 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
Warranty |
3 years parts and labor |